It is estimated that 6.5 million American workers are at a designated 252,000 construction sites in one day. Many of these workers however end up either injured or might succumb due to the poor decisions that were made in terms of safety management in the construction site. The most prevalent case involves falls in construction sites leading to a lot of injuries and fatalities. Major causes of injuries and fatalities in construction science can be attributed to the fact that there was no proper roof fall protection system. It is however recommended for every construction site that there should be a standardized the roof fall protection system according to the construction guidelines given by the construction governmental authority within the area. This article looks into some of the guidelines in finding the right roof fall protection system.
One of the most safety features that should be included in the roof fall protection system of your consideration is that it should be nonpenetrating. This essentially means that a lot of drilling might not be necessary during the installation of the roof for representation system in the roof and that the building can remain intact even after the construction phase is over. This means that the roof remains intact and that after the construction phases overcome a lot of expenses would have been removed off the shoulder of the building owner given also that cracks and leaks might not be as prevalent as it will be with traditional methods of guardrails. Warranty costs also follow traditional forms of guardrails because of the installation that requires heavy drilling which will be excluded when it comes to roof fall protection systems.
Another great aspect of your consideration should be the portability of the roof fall protection system. Time is a great factor when it comes to construction, and therefore having a portable system would also mean that you’re able to save one time during installation. You could also be able to save a lot of time by having the workers gets they instruction manual that comes from credible manufacturers will give them during the point-of-purchase and that this helps in the setup to be quite fast. You will therefore have the workers focus more on their tasks in the construction site rather than having to think a lot and put a lot of energy in the installation of the roof fall protection system.
You should also follow a guardrail system that has been recommended by the construction authorities within your area and nothing less. Without having to meet the required safety standards, it is not a guarantee that you will be able to protect your workers from any sort of accidents. Compliance is therefore necessary for you to be able to save yourself a lot of legal suits in the future.